|
 |
|
|
Production
Production equipment
| Cutting |
Cortina S Messer Griesheim , CNC |
| Bending |
Plate roll, Faccin 4HEL 2,5 x 30/25, CNC |
| Welding |
10 MIG/MAG welding devices
TIG welding device
Robot ABB IRB 2400 with manipulator |
| NDT |
X-ray, type Andrex 300 KV.
Magnetic particle yoke
Densitometer
Light-box |
| Turning |
ECCOA EL 6115E, CNC
PBR, TM 30 |
| Drilling |
Radial drilling machine
Drilling machine with movable table |
| Milling |
Horizontal milling machine |
| Lifting capacity |
3 travelling cranes (20 tonnes, 6.3 tonnes and 5 tonnes)
Various cranes with lifting capacity of up to 1 tonne. |
|
|
|
Production limitations
| Roll area |
| Plate roll |
Min. diameter: 420 mm |
| Max .diameter: 3000 mm |
| Max. width: 2500 mm |
| Max. plate thickness of steel quality 270 N/mm2: 30mm |
| Max. plate thickness of steel quality 360 N/mm2: 25mm |
| Pressure vessels |
| Seamless tubes |
Max. wall thickness: 50 mm |
| Plates |
Max. plate thickness: 30 mm |
| Max. diameter: 3000 mm |
| Vertical height |
Max. 5500 mm |
| Weight |
Max. 11 tonnes |
|
|
|
Production facilities
The company has interlinked production premises and warehouse / cutting hall.
All production material is stored indoors in suitable shelf units, and all materials used in structures subject to pressure are marked with a code to make it possible to document the quality of the materials used.
The warehouse is also used for cutting plates, tubes and other profiles. For cutting plates, a CNC machine (Messer Griesheim) with a table size of 2.5 x 6 m is used. There are also two saws, one of which has automatic feed, and the crane capacity in the warehouse is 5 tonnes.
In the welding hall there are 7 fixed workstations, where each operator is responsible for maintenance. The workstations are equipped with modern welding machines, turning, welding tables and tools. All the workstations have smoke extraction facilities with built-in filters for air cleaning.
For welding foundations and other parts produced in batches, a welding robot (ABB IRB 2400) with a manipulator is installed.
The hall has two travelling cranes with capacities of 20 tonnes and 6.3 tonnes respectively, as well as three rotary cranes with a capacity of 1 tonne.
The welding hall has a dedicated cabinet for sandblasting and surface treatment. The sandblasting cabinet, which has dimensions of 5 m x 6 m, has facilities for recycling used steel grit.
|
|
|
|
|
|
