Technical data HL2/77

General description:

Model HL2/77 is a two stage 90º V-compressor.

Cylinders and compressed air coolers are air-cooled.

Bearings and cylinders walls are splash lubricated. The compressor and motor are normally supplied mounted together and connected by means of a heavy-duty flexible coupling.

Both electrical and diesel engine driven versions are available.

Design particulars:

Design:
Nos. of cylinders	2
Cylinder arrangement	90º V
Nos. of compression stages	2
Cooling	Air
Cooling system
Valves	Reed valve
Dimensions:
Cylinder diameter	77 mm
Stroke	80 mm
Lubrication:
Sump capacity	4 litres
Lubrication system	Splash
Operating Parameters:
Maximum delivery pressure	30 bar
Maximum ambient temperature	45ºC (55ºC on request)
Normal temperature outlet air	Approx. 25ºC above ambient
Safety valves set point	10% above stage pressure
Maximum speed	1800 RPM
Rotation	Counter-clockwise (looking at the drive end)

Attachments/downloads